ShareThis

Thursday, September 9, 2010

Flash Exposure Compensation in Macro Photography

In this post, we will talk about the use of Flash Exposure Compensation (FEC) and EV (Exposure Compensation) in our Full Flash Macro Photography. But before we do that, we need to know what Full Flash photography and ETTL are.

Full Flash is easy to explain. Take a look at my typical Full Flash Macro Photography setting: MT24EX on ETTL Mode, 40D on manual exposure mode: F11, 1/200, ISO100. At this setting and 1X magnification, you will most likely capture a dark/black frame if you don't turn the flash on. Do note that when you change the focus from infinity to 1X, you lose about 2 stops of light. Since all (or most of) the light is supplied by the flash/speedlight, that is why it is called Full Flash Photography. More about it here.


E-TTL (Evaluative-Through The Lens) is a Canon EOS flash exposure system that uses a brief pre-flash before the main flash in order to obtain a more correct exposure. E-TTL uses the same evaluative metering sensor used for ambient metering. The sensor is internal to the camera and takes its exposure via the lens so any filters added to the lens will also affect the E-TTL readings giving more accurate exposure information to the camera.


Since it's full flash photography where all the light is supplied by the flash/speedlight, it only makes sense that you control the exposure directly using the Flash Exposure Compensation (FEC) function rather than EV (Exposure Compensation), which is meant more for ambient exposure where no flash is used.

My MT-24EX is normally in ETTL mode at -1 FEC. You need to find out for yourself what your typical FEC is for your type of flash and diffuser. It won't be the same.

The key thing here is to adjust your FEC according to the scene. In fact, i pre-adjust my FEC even as i approach my macro subject, that is, if i don't get overly excited by my finding :D

Generally, there are only a couple of scenarios:

A scene with immediate background: normally the FEC will stay at -1, plus or minus 0.3 stops. This one was at -1.3 FEC
A beautiful mom and her babies......IMG_4231 copy

A scene with no background, i.e. nothing but just the subject itself  to reflect the light from the flash/speedlight, I had to use -2 FEC, i.e even less light from the flash/speedlight compared to -1. -2 is the lowest I can go if i control via the camera body (40D).
sleeping bee - Black is In series:D IMG_0445 copy

If there is an immediate background but its dark, then the effect is the same. Look at this one, -2 FEC:
sac spider? IMG_2036 copy

You can control the FEC from the speedlight itself and it will override the in-camera FEC. From the speedlight itself, you can go up/down to + or - 3 instead of just 2 in camera.

A scene with really bright background. This time the FEC was -0.33, i.e. more flash than -1 FEC. Don't be afraid to go to +ve : whatever it takes to expose/light up the scene correctly.

A beautiful centipede.........IMG_1231 copy

It is always good to get the exposure right or within the ball park so you will not need to adjust the exposure too much in post processing. Too much of exposure correction in post processing will result in excessive noise and should be avoided.


On my 40D, it is extremely easy to control the FEC. Just one press of this button on the top panel,

R0016833 copy
Press the button on top of the icon with  +/- and flash symbols.


R0016837 copy

then rotate the big dial clockwise (to add) or counter clockwise (to reduce) the flash output
FEC
Animated gif showing the FEC at +1, 0 then -1.

You will see something similar in the view finder as well.









It was quite easy to control FEC on previous camera Nikon D80 too. Just press and hold the FEC button with the left hand and turn the dial with your right. In fact, i think it was easier on the D80 but it's still not bad on the 40D.

On the lower end Canon model such as the 450D, you might have to go into the menu to dig up the FEC control. So unless you can register the FEC into "My Menu Setting", you might just want to control from the speedlight itself.

On models like 60D and 70D, you can customize the Set button to have quick access to FEC. Please watch this clip.

FEC (Flash Exposure Compensation) is not just for full flash macro photography though. I use it when I shoot event, portrait, etc - any time when flash is used.

So the next time you shoot full flash macro again, put these macro photography tips to good use. Analyze your scene better and dial in the appropriate FEC. Try your best to get the exposure right in-camera so you will have less work during post processing :)

5 comments:

  1. That's some really cool macro photography. Thanks for the post.

    Cheers,
    GuessTheLighting.com

    ReplyDelete
  2. Great tutorial - I'll admit I haven't spent the time to try to figure out ETTL and FEC, mostly just sticking with manual flash. I'll have to give it a try.

    That Scolopendra centipede is almost the exact opposite of mine :-)

    ReplyDelete
  3. Thanks for the comments, Ted S and Ted C :)

    Ted C, yes, do give this a try. Much easier to control the FEC then guessing the manual flash power required at different magnification.

    ReplyDelete
  4. I suppose the flash adjusts based on aperature also? For example, I might want to shoot a subject face-on at f/10 for a shallow depth of field to emphasize just the face or a profile at f/16 to capture as many details as possible. Does E-TTL adjust the amount of light needed? If so, this gives me greater control to choose my aperature (rather than finding the right aperature for flash on manual setting).

    ReplyDelete
  5. Yes, with ETTL it's all automatic. Check this out on how ETTL works. Basically, it sends out a pre-flash to gauge how much light is needed and that saves us the trouble of changing from say 1/2 to 1/4 or 1/8 when changing the magnification.

    http://orionmystery.blogspot.com/2010/08/flash-sensitive-macro-subjects.html

    ReplyDelete

LinkWithin

Related Posts with Thumbnails